MacroSystem Digital Video HDV-Recorder Manual de usuario descargar pdf (Pagina 86)

Chapter 5

that if you select a screen mode that cannot be displayed by

the monitor you connected, this monitor will probably indicate

it does not ﬁnd any signals. In that case, you will not be able

to conﬁrm the screen and the system will switch back to the

previous monitor setting after 30 seconds in order to restore

your display.

A few limitations apply when running the system with a VGA

monitor, but these are not relevant to the ﬁnal results of the

ﬁlm. In the following we would like to give you a few tips on

how to work with VGA mode.

•SincethescreenrefreshrateofaVGAmonitorisnotthe

same as a television’s refresh rate (50 Hz), the video footage

will appear jerky when played, even though this has of course

no effect on the video output via the DV interface.

If your VGA monitor supports a frequency of 75 Hz, we recom-

mend you use a VGA resolution with a frequency of 75 Hz for

PAL in order to minimize picture jerkiness during playback. For

NTSC, we recommend you use the 60 Hz modes.

•Comparedtovideomode,VGAmodehandlescompletepic-

tures (non-interlaced). This results in a comb effect appearing

on moving objects (e.g. camera sweeps or cars driving by) so

that the edges no longer look sharp (fringed). This limitation is

of course only of relevance when displaying footage on a VGA

monitor and is not part of the actual video itself. To change

this, go to the “System settings“, press the “Screen“ button

and select the “Field“ option. This way, play-back is exempt

from artifacts.

•Thecolorsaturationandcontrastpropertiesofthepicture

displayed on a VGA monitor are very weak but they are dis-

played correctly in “Video” mode (television). Therefore, please

avoid increasing the saturation or contrast since this could

lead to color bleeding or distortion that is not visible on the

VGA monitor. Picture sharpness is also displayed differently in

VGA mode than it appears in the ﬁnal video.

After you ﬁnish editing the video, we recommend you check

the saturation, contrast and picture sharpness of the footage

on a television in video mode.

•Theentirevideopictureincludingtheoverscanareais

displayed when working with various menus in VGA mode

(e.g. when playing, trimming or splitting a video). This area

sometimes contains image distortions that are no longer visible

when the video is later exported or viewed on the television.

When you are positioning titles, we recommend you do not

place them too far into the area around the edges of the pic-

ture or else the letters will no longer be visible later on. In any

case, please make sure you carry out a ﬁnal check by watch-

ing the video footage on a television.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 111 112

Comentarios a estos manuales

Sin comentarios

MacroSystem Digital Video HDV-Recorder Manual de usuario Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) MacroSystem Digital Video HDV-Recorder