MacroSystem Digital Video HDV-Recorder Manual de usuario descargar pdf (Pagina 79)

Bogart SE 5 User manual

4.13.2.2 Screen elements in the storyboard view

This screen can be seen in the audio-mix with the storyboard

view:

(1) The storyboard and its operation is familiar to you from

other menus. You can use the slider to move very quickly

through the storyboard scene by scene.

With the buttons, you can go from sample to sample through

the ﬁlm strip in the currently active sound track. This function is

very helpful when a large number of audio samples are located

below a single video scene, as the samples are displayed only

very brieﬂy during normal play-back. Select the desired sound

track either directly or by clicking on the corresponding symbol

on the right-hand side of the screen.

(2) This color control bar directly beneath the storyboard

shows the range of the original video scenes in which the

audio has not been created (yellow) or has already been

completely created (blue). Over-modulation is indicated in red.

Overmodulation will be indicated as soon as the audio level is

clipped. Such clipped audio should be edited until it is no lon-

ger clipping. In most cases, you can simply reduce the volume

level by -1 db for the original audio.

(3) Select a button with the fx symbol to the left of the sound

tracks to add an effect for the complete sound track.

Effect selection in the Audio-Mix menu is described under item

(14) Effects. A white dot in the associated button indicates the

presence of an effect in the sound track concerned.

(4)

Click on the Record button to play the storyboard

(from the current scene onwards). Simultaneous recording is

possible through the selected audio input. For instance, if you

have selected the microphone input, you can record a com-

mentary for your video. During audio recording, a volume level

indicator is overlaid over your video material at the bottom

edge of the screen. The recorded commentary is subsequently

added automatically to the sample list. If the commentary track

is active and provides sufﬁcient capacity for the audio sample,

it is automatically placed in the commentary track. The system

will automatically add 5 seconds of silence at the start and the

end of recorded commentary. This will enable you to trim the

ther, this range of the scene will also be added to create the

sample.

•Freelyselectable:Youcanfreelychoosetherangeyouwant

to include. After conﬁrming, you end up in the Trimming menu

where you can enter the range.

•Useoriginalsound:Shouldtheoriginalsoundofthescene

be included in the calculation? If yes, you should put a check-

mark in this selection otherwise, a dash should be visible here.

All other tracks will be always be put together.

•Replacesample(s)intrack:Shouldthesamplesinthisrange

be replaced by this new sample? If this is what you want, you

should put a checkmark in the box. Your samples will then be

combined into one. This will free up space in this location to

add new sound samples.

•Insertintrack:Thisoptionisactivatedwhen‘Replacesound

sample(s) in track’ is checked. This is where you indicate in

which track the new sample should be located. Track 1 is not

shown, since nothing can be added to the original sound.

•Insertsampleinbin:Doyouwishtomakethisnewsample

also available in the audio bin? You should then put the check-

mark here. The new sample will be inserted behind the then-

current sound sample in the bin.

•Newname:Thisiswhereyouenterthenameofthenew

sound sample.

Notes:

•Whenyouwanttocreateanewsoundsample,youshould

either replace the sample in the track, or insert it in the bin. If

you did not select one of these two possibilities, a new sample

will not be created.

•Sinceyouareabletohideindividualsoundtracksinthe

timeline view, for the sake of more clarity, you should take this

into account when you are creating a new sample. You could

insert the new sound sample in a hidden sound track and then

ﬁnd it difﬁcult to recognize the results. It is also possible that

a hidden sound track contains samples that have, of course,

been included in the newly created sound sample.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 111 112

Comentarios a estos manuales

Sin comentarios

MacroSystem Digital Video HDV-Recorder Manual de usuario Pagina 79

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) MacroSystem Digital Video HDV-Recorder